Concrete Foundations & Footings

The Most Important Part of Any Structure

Your foundation literally supports everything above it. Whether you are building a new home, adding a room addition, constructing a garage, or installing a heavy structure, the foundation must be designed and built to handle the load safely. A properly installed foundation prevents settling, cracking walls, sticking doors, and all the other problems that come from inadequate support.

Footings work hand in hand with foundations to distribute weight into the ground. They spread the load over a wider area so the structure does not sink into the soil. In South Florida, we deal with sandy soils and high water tables that require special attention. We understand these local soil conditions and engineer our foundations accordingly so your building stays stable for its entire lifetime.

Types of Foundations We Install

Different structures need different foundation types. We install the full range of residential and commercial foundation systems:

• Slab on grade: Monolithic pours that combine footing and floor into one solid piece.
• Stem wall foundations: Footings with vertical walls that support the structure above grade.
• Pier and beam: Concrete piers with footing pads that elevate structures above ground level.
• Grade beams: Reinforced beams that connect footings and support bearing walls.
• Equipment footings: Heavy-duty pads designed for specific machinery or structure loads.

We work from engineered plans or can help you get the proper foundation design for your project. Every installation follows local building codes and best practices.

Our Foundation Installation Process

Foundation work starts with accurate layout and excavation. We dig to the depth specified in your plans, making sure the bottom is level and compacted. Soil conditions get assessed, and if we find soft spots or unsuitable material, we address those issues before proceeding. This is not the place to cut corners.

Forms get built to exact dimensions with proper bracing. Reinforcement steel goes in according to engineering specifications. We use the correct concrete mix for foundation work, which typically has higher strength requirements than standard slabs. During the pour, we vibrate the concrete to eliminate air pockets and ensure complete filling around all reinforcement.

Curing is critical for foundations. We keep the concrete moist and protected during the initial cure period. Anchor bolts or other connection hardware get installed at the right locations while the concrete is still workable. The result is a foundation that meets or exceeds all strength and durability requirements.

Why Foundation Quality Matters

Foundation problems are expensive and difficult to fix after the fact. We have seen homes with cracked walls, sagging floors, and doors that will not close properly, all because the foundation was not done right initially. Fixing these issues often requires lifting and stabilizing the structure, which can cost tens of thousands of dollars.

Doing it right the first time costs a fraction of what repairs would run. That means proper soil preparation, adequate footing size, correct reinforcement, and quality concrete placed by experienced professionals. We bring all of that to every project. Whether you need a simple shed foundation or a complete home foundation system, you get the same commitment to quality. We also handle related work like retaining walls and masonry that may be part of your overall project.

Foundation and Footing Questions